Need sj case torque sequence

[HBCwatercraft]

Can somone help i need the seq and torque specs for the lower cases for the 62t. I need them quick the cement is
drying and obv i lost the specs i thought i had...i tryed google and on here but no luck. HELP..LOL

 

[JetManiac]

The sequence is printed on the cases, start in the middle and work out alternating sides as you go. 25ft. lbs for cases I believe.

 

[HBCwatercraft]

They would be printed if i didnt have a billit plate there. Its a stroker set of cases. Any pics that can be posted? Ben

 

[HBCwatercraft]

Is that 25 ft on the 8mm bolts in the center, and 25ft on the 10mm on the out side that hold the cases and bed plates as well?

 

[2lick]

Order would be inner ones working your way out rotating to every other side....

Torque i have written down 11 then 18.... i will try and look more and find other numbers.... but 18 i think is right

 

[2lick]

Bed Plates I have at 11 and 18 as well......

these specs are all on a sheet i used two years ago... ill try and find more recent

 

[2lick]

yup everything i have points to 11 then 18 on both....
http://spreadsheets.google.com/ccc?key=p0d1hKt6wRU7U4xe2YmkVZg&hl=en

It has worked for me I guess....

 

[HBCwatercraft]

Thanks. I can go to bed knowing it was done right. Thanks for ur help 2lick.

 

[SJ Thumpa]

My online manual says:
case 11-20
bed plate 17-34

Is it wrong?