Need Pics of Exhaust on Lamey

[GinoNewOrleans]

Anyone have pics of the exhaust manifold hooked to a Lamey w/ PV? please post and let me know how you got them to clear. Thanks

 

[superramjet]

this one is forsale btw. spacer attached to headpipe, manifold cut and other side of headpipe cut.

 

[750SX]

this one is forsale btw. spacer attached to headpipe, manifold cut and other side of headpipe cut.

How much?

 

[superramjet]

How much?

$750 for complete pipe with metal chamber $1000 for complete pipe with carbon chamber, modified with water injection for maximum bottom end hit.

 

[crammit442]

Not a terribly technical job. Just lots of grinding time and careful welding. Most shops normally charge 450-500 for the job. Supposed to be a big pain in the rear end.

 

[restosud]

the grinding is easy. the weld up is more difficult but nothing a good mig can't handle.
you just need to make sure it's watertight afterwards,that's all.
the spacer like super shows is another way of dealing with this but creates other problems.

 

[Flash-FX]

Grinding fun? Here's some pix I found.

Superramjet, Cool stuff there!

 

[GinoNewOrleans]

Grinding fun? Here's some pix I found.

Superramjet, Cool stuff there!

Thanks for the help.

 

[SJ Thumpa]

the grinding is easy. the weld up is more difficult but nothing a good mig can't handle.
you just need to make sure it's watertight afterwards,that's all.
the spacer like super shows is another way of dealing with this but creates other problems.

Just wondering what other problems the spacer creates?

 

[SUPERTUNE]

No more than .250 spacer and all is good... Hey, that's my motor I built for Ryan J.!

 

[restosud]

the headpipe goes up and brings the chamber with it.the space is already tight there.