Blaster need help picking out a head

[Blasterobb17]

I have a 96 blaster with the dual carbs. I want to buy a head to get a little more power but I have no idea which one to get. Also can someone explain to me the difference between girdled and non girdled? The ski is stock besides a riva red pipe and tau ceti air filters. Thank u

 

[ek98]

I would go with the ada girdled head, 185 psi 35cc domes, girdled= bolts/ studs that tie into your bottom block with the head- more strength.

 

[Blasterobb17]

Thank you very much. Would I have to make any adjustments to make those bolts fit?

 

[964Chris]

no need for adjustments......you use your stock head bolts along with the girdled bolts provided with the head.

 

[Blasterobb17]

Alright cool thanks guys. Just one more question.... do you see me having to rejet my carbs after putting the head on or do you think it would be fine?

 

[tightithrash]

go with a cold fusion half girdle set up. has non removable domes so they wont spin like an ADA. cold-fusion.com

 

[Dustin Mustangs]

What ever you do, get one with at least a half girdle, if not full. That is one heavy pipe! ADA would be a good choice.

 

[Blasterobb17]

thanks alot guys... so something like this would be good?

http://cgi.ebay.com/ebaymotors/Yama...00591318872QQptZPersonalQ5fWatercraftQ5fParts

 

[964Chris]

or something like this:

http://www.x-h2o.com/threads/89286-ada-girdked-head-kit

or PM jetmaniac, he's an ADA dealer:

http://www.x-h2o.com/threads/80623-Jetmaniac-is-now-ADA-Dealer-ADA-Heads-throttle-wheels-etc.-BILLET-BLING!!&highlight=

 

[Screwy]

ADA girdled head all the way. My only problem with a non removable dome head is that if you start modding the motor more, you gonna have to buy another head. Dont get me wrong coldfusion makes some sweet stuff. I have their mid shaft bearing housing.

I just dont like buying parts twice.

Blasterrobb where in jersey r you?

 

[Blasterobb17]

Ya I don't see myself modding out the engine anymore after the head. I'm in north jersey bergen county. But I ride at barnegat bay light house a lot and shoot up too greenwood lake some days

 

[DirtyJ]

IMHO
ATP or ADA and be done with it:biggthumpup:

 

[Blasterobb17]

Does anyone have a picture of an ada installed on their blaster?

 

[blaster800]

Here ya are ,what are you wanting to see ?

Oh yea -- I gotta laugh out of this statement ! Quote: ''Blasterobb17''

( Ya I don't see myself modding out the engine anymore after the head) !!!! ....... Thats funny ! The power bug is impossible to avoid!

 

[Dustin Mustangs]

Here is mine...

 

[ek98]

Here is mine...

that is one clean looking 96 b1 engine compartment

 

[teddy]

you have to replace your base gasket when installing a girdle head..correct ???

 

[munki63]

Buy a head that takes ADA domes and only that type of head BECAUSE if you ever decide to send your motor to xmetal or jetworks for a big bore set-up they both use ADA domes for there set-up's and it will save you $$ down the road

This is my head

 

[Blasterobb17]

thanks alot guys i just wanted to see the head bolted in the engine. my blasters in the garage and forgot hot it looked for a little.

Im pretty much looking at the ada head kit from jetmaniac, i just want to know exactly what im getting myself into when im trying to install this thing (girdled bolts fitting, having to adjust the carbs)

i seriously appreciate all the info you guys are giving me

 

[964Chris]

it's a very easy install......the o rings can be a bit of a pain, but a little grease/vaseline will go a long way in helping to keep them in place. def. put anti seize on the girdle bolt threads before installing, they like to stick.