Philip Clemmons
Owner, P&P Performance
- Location
- Richmond, Va
I am trying to figure out what make/model piston this is............
I will post pics later, but it has the following info:
ART on inside skirt
made in japan 61x 00
On the top, an arrow facing the exhaust port, an F for front, and 2.00 (for oversize?)
This came out of my 5 mil stroker that was originally an 82 mm bore. Cylinder measures 3.265" and the piston measures 3.260", or there abouts. I am using a dial caliper so measurements are not 100%F exact, but close enough.........
I will post pics later, but it has the following info:
ART on inside skirt
made in japan 61x 00
On the top, an arrow facing the exhaust port, an F for front, and 2.00 (for oversize?)
This came out of my 5 mil stroker that was originally an 82 mm bore. Cylinder measures 3.265" and the piston measures 3.260", or there abouts. I am using a dial caliper so measurements are not 100%F exact, but close enough.........
