Other need help finding a part

[chips]

http://www.mcmaster.com/#44555k121/=4x80tj

that for 3/8's cooling line???
maybe im being dumb and its right in front of my face...

 

[Woody]

5th line down...for 1/4" id line. what exactly are you looking for thruhull fittings for dual cooling? if so, i don't think you're missing it, the biggest i saw on mcmaster was 1/4".

to run dual cooling, most people just put a aluminum/stainless/pvc pipe thru the hull (see next post)

if i'm way off for waht you're using this for my bad...but no you're not crazy the biggest i saw was 1/4"

 

[Woody]

you can get the thru-hull parts i think what you're looking for here:
http://www.rivayamaha.com/RivaStore/product_page.asp?Category=Dual Cooling Kits

 

[chips]

no its just for something on my stunt hull.

 

[craven]

Go to a local Hydraulic shop that stocks brass adaptors or possibly a Napa type store, but usually they only stock the minimums

 

[Woody]

no its just for something on my stunt hull.

care to elaborate? maybe someone can give you another idea as to what you could use?

 

[QuickMick]

Blue Water Ships store sells the 3/8" through hull stainless fittings for about 8 bucks each.

 

[chips]

Blue Water Ships store sells the 3/8" through hull stainless fittings for about 8 bucks each.

do they have a website?

and to elaborate I just need sometjing so I can connect colling line to one side then go through like this fitting does then colling line on the other side.

 

[SUPERJET-113]

No need for a fitting on each end. Use regular 5200 and it will not go anywhere anytime soon!
If you got the time to wait for regular 5200 to dry its well worth it.

 

[Woody]

http://www.bluewatershipsstore.com/default.aspx

 

[chips]

not seeing it there.

 

[The Penguin]

not stainless:

http://www.bluewatershipsstore.com/detail.aspx?ID=6893

 

[QuickMick]

not seeing it there.

Chips, Im not sure. There is a store right around the corner from my house. If you need one I can pick it up and put it in the mail tomorrow.
I know I have one in my spare fitting box. I can get a pic of it tonight.
Like I said I think it was $8 something and change.

 

[chips]

o wow yea I need two of them, but a picture would be cool

 

[QuickMick]

o wow yea I need two of them, but a picture would be cool

OK Im going to Harbor Freight today also if you need anything from there. I have to pick up some chip brushes for more glass work. Cant beat the price, about 10 Cents each.

 

[QuickMick]

not stainless:

http://www.bluewatershipsstore.com/detail.aspx?ID=6893

From what I see in the first post, thats not what Chips is looking for. Thats not what I have.

The first post has a link to a bulk head fitting. which is what I have.

 

[The Penguin]

my thoughts on the the McMaster part linked:

It appears you would need 2 of them, one at the hull, and one in the bulkhead...which means you would need a piece of hose with 2 clamps between those 2 fittings...under the tray...where you can't access it. Hoses fail, clamps fail.

I would not use that arrangement on my ski.

 

[chips]

that's not really what I'm doing though..everything will be excessible.

 

[The Penguin]

Ok, nevermind.

 

[orangefinger]

amazon.com $ 6.00

Stainless Steel 316L Welded Annealed Tubing 3/8" OD x .305" ID x .035" Wall 36" Length