Super Jet need dimension for skat C75 cut back...

[aramis]

Hi,

Does anybody have a measurement of a stock (or known cut back) on a Skat C-75? I need to know the amount of cut back mine has, and I can't find a reference dimension anywhere.

I assume it's as easy as measuring from the back outer ring down to the inner threaded bore face.

If anybody has that info, or can point me to the right thread, I'd appreciate it. Thanks!

 

[Twinturbostang]

5mill or 6mill just don't hit the veins

 

[aramis]

Yeah, but 5 or 6mm from what dimension?

I know that this prop has SOME cut back already, and I need to know what that is so I can get it ready before the other parts arrive. If it's already 5mm, cool. But if it's 3mm, I want to go another 2mm. And I can't tell without some reference dimension.

 

[#ZERO]

Measure it from the threads to the driveshaft seating surface and it should be around 7mm for a stock C75.

 

[aramis]

thanks... I think I did it right: I measured from the back face of the threaded bore down to the first thread. It measured about 6mm, so apparently I was only cut back about 1mm.

 

[Tyler Zane]

Good to know