FX-1 ?my ski runs like :-):-):-):-)?

[tensecrnr]

I HAV AN FX-1...61X OUT TO A 84MM(753) WISCO...PROTEC PIPE..PROTEC CDI...JETTED CARB...RAN OK...THEN I ADDED A GROUP K LIGHTENED FLYWHEEL AND ADA HEAD 175PSI DOMES..IT RUNS OK FOR A MINUTE THEN LIKE 1 CYLYDER..?SO I WENT BACK TO ORIGINAL HEAD MILLED STOCK I55..PSI.. STILL RUNS LIGHT ....SO MY ? IS SHOULD I ADVANCE THE TIMING ON THE STATOR???????IS IT THE FLYWHEEL?????THIS SKI HAS PISSED ME OFF SO BAD MY GIRL BOUGHT ME AN 09 SUPERJET.....(HEAVY BOAT)...


HELP PLEASE????

BEFORE I COULD DO ROLLS/STABS...ETC...NOW NOT MUCH....:brap:

 

[FX-Rex]

try going back to the original flywheel.

 

[OCD Solutions]

Did you check the static timing once the new flywheel was installed?

 

[rollin5150]

THIS SKI HAS PISSED ME OFF SO BAD MY GIRL BOUGHT ME AN 09 SUPERJET.....(HEAVY BOAT)...

I have yet to get pissed at my ski but now I am looking forward to it. I guess I could leave subtle clues for the wifey:woot:

 

[Big Kahuna]

Did you check the static timing once the new flywheel was installed? Some have reported that aftermarket timing varies greatly from OEM and needs to be verified.

His is an OEM Flywheel.

 

[OCD Solutions]

His is an OEM Flywheel.

I'm gonna have to hire you as my editor aren't I? lol

 

[Big Kahuna]

Hey, I am broke, I will do it for 50% of my normal rate.

 

[OCD Solutions]

Change is coming BK, slowly but surely.

Swap back to the original flywheel and let us know how it runs after.

 

[special fx]

T flywheel on an X stator?

 

[DAG]

wish my ski ran like a happy face

 

[Big Kahuna]

I HAV AN FX-1...61X OUT TO A 84MM(753) WISCO...PROTEC PIPE..PROTEC CDI...JETTED CARB...RAN OK...THEN I ADDED A GROUP K LIGHTENED FLYWHEEL AND ADA HEAD 175PSI DOMES..IT RUNS OK FOR A MINUTE THEN LIKE 1 CYLYDER..?SO I WENT BACK TO ORIGINAL HEAD MILLED STOCK I55..PSI.. STILL RUNS LIGHT ....SO MY ? IS SHOULD I ADVANCE THE TIMING ON THE STATOR???????IS IT THE FLYWHEEL?????THIS SKI HAS PISSED ME OFF SO BAD MY GIRL BOUGHT ME AN 09 SUPERJET.....(HEAVY BOAT)...


HELP PLEASE????

BEFORE I COULD DO ROLLS/STABS...ETC...NOW NOT MUCH....:brap:

Check your plug wires. Pull the caps, use needle nose pliers and gently tug on the wires, if they pull out, cut back and repeat with the pliers, if they hold install crimp ends and boots (or OEM connector). If the wires are broken the ski will run on the trailer, run good for a minute until you hit a wave or jump, then the wire starts to break down not sending the current for the spark.