My new find, 701 wetjet power

[Crab]

Found this today on a galv. trailer for $300, can you spell " X2 MOTOR CONVERSION"!!!!!

 

[Sospikey]

That's a steal!!! :Banane09:

 

[shawn_NJ]

The hunt is on for yammy motors now from the hardcore x2 crew...lol

 

[Scraggly]

very nice find there!!!!!!!!!!!!!

 

[wydopen]

nice one crab

 

[Boris]

How hard is it to stick a 701 into an X2 ?

I have a complete motor but don't have an X2 hull yet.

 

[Crab]

I'll be doing conversion mockup and take lots of pics so you all know what is involved. I'm wondering too if it will fit with that stock pipe as well.

 

[YAMA CAT]

Cool Deal. Sell the trailer and have next to nothing in a 701 motor.:arms:

 

[Crab]

Cool Deal. Sell the trailer and have next to nothing in a 701 motor.:arms:

My plan exactly.

 

[Scraggly]

why the stock pipe crab?

 

[Crab]

I may be celebrating prematurly, might be a 650 with factory dry pipe.

 

[nikad58]

sure looks like a 701 to me ! It just doesnt have the wet jet manifold or 46 carb

 

[Crab]

sure looks like a 701 to me ! It just doesnt have the wet jet manifold or 46 carb

Its all 61x thank god.........urr: I was looking down at the reeds with the carb off, and there was a focking bolt laying in there!!!!:bad3: I will measure the carb tonight. Wondering how well that factory dry pipe does in the power delivery. It's also got a fairly small waterbox and midshaft that looked like an SJ at first glance, but it has 4 bolts.

 

[Crab]

Pics, it will require at least a bore and pistons.

 

[Shonuff]

What is this 701 X2 that you freaks speak of?

 

[Crab]

What is this 701 X2 that you freaks speak of?

It may become all the rage, we will have to wait and see.

 

[ATS_Aaron]

84mm pistons cost the same as 81.5mm pistons. Bore costs about the same too. May as well go 760 on that bad boy.

Aaron

 

[WaveDemon]

I will measure the carb tonight.

it's going to be a 46.

 

[ATS_Aaron]

it's going to be a 46.

I thought I read that the 48mm carb'd ones had a one piece intake/reed cage? That one is clearly 2 piece. So it may be a 44mm carb.

Aaron

 

[SUPERJET-113]

BTW - Wetjets have billet couplers and a nice urethane dampener donut(better than OEM). You can see it in the pics! Nice score Crab.

I see you whore!