Blaster modding factory water box, good idea or bad.

R

robstyle

Location
Dunedin-nz
Pulled my water box apart as the inlet pipe was loose and leaking.
Noticed the exhaust passes thru a tiny like 38mm pipe, can I add another one for a bit more flow or will this :):):):) up backpressure and make it run like dick?

I know am ones don't yield f all more power, but do they offer bottom end snap?
 
kevbo

kevbo

Location
dfw
robstyle said:
Pulled my water box apart as the inlet pipe was loose and leaking.
Noticed the exhaust passes thru a tiny like 38mm pipe, can I add another one for a bit more flow or will this :):):):) up backpressure and make it run like dick?

I know am ones don't yield f all more power, but do they offer bottom end snap?
Click to expand...

Relieving back pressure will do more for a stock exhaust but nothing for an aftermarket tuned pipe. More noise will make it feel faster. Go ahead and drill holes in the baffle, it wont hurt anything and you will get a little more noise and think its faster.
 
You must log in or register to reply here.
Top Bottom