Blaster Mach 1 cooling lines and a question

[Patrick Star]

I just got a Mach 1 pipe for my blaster and was wondering if anyone had any diagrams or whatnot for the cooling lines. Looks like it has a couple plugs for dual cooling, one in the manifold and the other near the base of the half pipe, and the single cooling line fitting installed. I do want to run dual cooling and was going to use the hole in the top of the manifold vise the one on the base of the half pipe.

Also it has 2 misters and was wondering what the settings for it should be for low end power.

 

[munki63]

I wouldnt run dual cooling on a blaster...but thats just me

 

[Patrick Star]

The water here gets really warm in the summer.

 

[munki63]

i ran single cooling on a slightly mod sj, water was near 70...im not even joking, shallow lakes 2 weeks at 100 does that

 

[Patrick Star]

Right now the water temp is 64. In the summer it gets up into the mid 80's. It bugs me with the ammonia in the water. Kinda stings the eyes.

 

[WaveDemon]

I just got a Mach 1 pipe for my blaster and was wondering if anyone had any diagrams or whatnot for the cooling lines. Looks like it has a couple plugs for dual cooling, one in the manifold and the other near the base of the half pipe, and the single cooling line fitting installed. I do want to run dual cooling and was going to use the hole in the top of the manifold vise the one on the base of the half pipe.

Also it has 2 misters and was wondering what the settings for it should be for low end power.

the way it's supposed to be set up is single scooling into the manifold, out of the head then into the half pipe.

If I were to run dual cooling on that I'd do a motor circuit and a pipe circuit.

 

[Patrick Star]

I have heard of that before. I would run the line from the head into a pisser instead of the half pipe and then run the second cooling line into the half pipe?

 

[Motorheads5]

I called Pro-Tec and they faxed me the routing for electronic water injection and without they are awesome to deal with.
I just dug through a whole bunch of paperwork in the shop and can't find it or I would scan it and post it for you.

 

[Patrick Star]

Thanks I ended up getting ahold of them.