Super Jet Lowered nose piece

[NorCalSJ]

How is everyone mounting their lowered nose piece on a RN? I'm trying to avoid using screws through the top.

 

[Yami-Rider]

1 or 2 screws threw the top front and 2 screws at the back is how I've always mounted them.

It could be done without screws at the front, but it would be a lot more work.

 

[ksarge91]

I think the older Waterdawg nosepiece's used a bracket that attached similar to the stock nosepiece (see pic). I've found a few screws work best though.

 

[shaunsteezy]

i just used the 2 coarse thread screws and put a bead of silicone around the rest and it holds great. do not use 5200, it will be impossible to remove. this is the way that tomski recommended. i made a bracket like the wdk one above but every couple months the bond would fail and the bracket would fly off.

 

[SUPERJET-113]

Screw it or lose it!

 

[ajmps1]

I riveted an aluminum tab to the ski for the nose piece to sit under right at the center. Worked great.