links & pics to all x2 parts 4 sale made by members here/up trim/hulls/hoods/Brace/

[wadman]

click links for full details i am just grouping stuff up to find it easy. don't post in this tread click on the links. thanks

We are also making a nose cover to reshape the bottom front of the X-2 these are made and ready to ship (simalar to the jap part)$225

On to the hood we are making a shaved light weight hood these hoods look sick and are rear breathing. The carbon hood weight is 4lbs for $550 and the glass hood will be around 9lbs for $350 the hood will be ready to ship next week here is a pic of the plug more pixs to come soon

One of these is a lightweight hull pics to come soon the hull is an inch shorter then shock and has everything shaved. the frist 2 that we are building are going to be setup for yamaha 10mm stroker engines. the hulls are going to be around 80lbs and sell for $3250.

for more info please call us at 732 505 8115 or email us at tntperformancewc@aol.com
__________________
Full Throttle Powersports
732 505 8115
225 rt 166
South Toms River NJ 08757
www.FULLTHROTTLEPOWERSPORTS.net

Link to the post http://www.pwctoday.com/showthread.php?t=155552

 

[wadman]

I've worked for weeks perfecting this. Unwilling to pay the high price that the Maekawa up trim costs. I've designed up my own. I've machined up the prototype and the CNC shop is in progress.
It took me a little while to perfect but now I've finally got it.
The pictures show it installed on my X2. From the neutral position I get full up trim to the point where the nozzle almost touches the hull. This is even with the back chopped 1.75" and the pump set back 2". I could even get a little more if I wanted with a little more hull hacking.
I'm still sourcing a good cable and lever combo for it. Any BMX Left side brake lever will do the trick.
I'm doing a limited production run and am initially giving the option of purchasing the trim unit only without the lever or cable. I figure some some of you might want to find a lever of your own.
The trim units will be ready in a week and about 2 with a lever and cable setup however it will be about $50 more.
The trim lever alone is $250 made from billet 6061-T6 aluminum and stainless hardware. The production unit will look much better than the prototype and not have the gash in the base where the prototype jumped out of the chuck.
Contact me with any questions. You can email me at larmourx2@hotmail.com or PM me. If you want to ensure you get one you can send payment plus $17 shipping to the same email address via paypal or contact me for my address to send a money order.

Link to the post http://www.pwctoday.com/showthread.php?t=154050

 

[wadman]

heard some guys saying they wish there were tubbies to fit the x-2- Well now there are. just started on this tonite. I plan on making two different exhaust outlets as well. One that mounts up front directly off the waterbox and the other in the stock location. They will be extra long and the mount will be angled to fit the tubbie. 140.00 shipped US

link to the post http://www.pwctoday.com/showthread.php?t=155678

 

[wadman]

So I'm getting ready to fab an exhaust outlet to make room for surfjetlouie sponsons that will point straight in at the waterbox outlet. It will look similiar to the attached image (thanks #.0 for the picture) I will also include a paper template that you can use for drilling the holes.
Looking at pricing this around $25-$30 shipped

Link to post http://www.x-h2o.com/threads/30712

 

[wadman]

Attention all X2 Surf Ride owners!!!!!

Here is the new X2 Tower Strut Brace available now from Jet Ski Haven.
Up to now these were only available from Japan at $420.00 USD now ready to be shipped from JSH for $225.00 it is made of Aluminum pipe and SS hardware...
This will allow you to remove both of the OEM vertical braces. This will then allow more room for dual carb set-ups and eliminate aftermarket exhaust head pipe fitment issues (Factory Race Pipe).

Thanks John - Jet Ski Haven
john@jetskihaven.com
225-612-5540
www.jetskihaven.com

Link to the post http://www.pwctoday.com/showthread.p...9&highlight=x2

 

[wadman]

I have a sample of the first one that has come off the machine line today. These will be ready to be shipped sometime next week.
I am making these available to all the form members for $150.00 + 12.00 s/h each in the lower 48 US. These will be marketed in several locations for $225.00 and up + s/h.
If you want one please send me a paypal payment to john@jetskihaven.com and as soon as I get them next week I will be shipping them out. Please note what the payment is for so I get what you ordered sent to you.
Let me know.
Thanks,
John - Jet Ski Haven
www.jetskihaven.com

Link to the post http://www.pwctoday.com/showthread.p...6&highlight=x2

 

[wadman]

I have been looking at the japanese style foot holds for the x2's .I priced them and they are wayyyyyyyyy out there,so that being said I am working on making a set.Here is where I am at so far.I am using the pvc foam product from Farco plastics,it is thermoformable so the first step is I cut out the pieces and heat them up to 150 degrees for a few minutes.Then I formed it around my shoe while it was warm and hold it till it cools,it only takes a minute to cool and retain shape.Then I spread it out slightly before it fully cools off.
Here is what I ended up with. I'm all about flatwater anyway and plan to make these easily removable,more on that later,now I know what the jap versions cost they are ridiculous,I was thinking maybe $80.00 a set for a fiberglass-white gelcoated set,$125.00 for a carbon fiber set,let me know if I am in the ballpark or not.

link to the post http://www.x-h2o.com/threads/26211

 

[wadman]

Kawasaki Jet Ski X2 SX New PJS 850, 125HP Race Engine

Here is what you get..................
The ALL NEW PJS 850 Race Engine:

Performance Data
7200 rpm engine with a linier power band, that means it will hit hard on the bottom all the way to the top.
The rev response is inhanced by the custom pistons precharging the boost thus allowing for the absolute most agresive exhaust port timing.
These are being set-up to run on 100 octain low lead aviation fuel.
130HP expected with a set of dual 44mm carbs Highly Recommend NOVI's and a Factory Pipe
Impeller pich recommendations, carb jet specs will be available soon for both the standup or X2 guys.

The cost on these are $2500.00 + s/h or $2300.00 + s/h if you send me a good 750 s/p core or $2100 + s/h if you send a good 750 s/p with a good enough lower unit to build off of.
This will include:
Your choice of powder coated colors
Customized Cases,
Customize Pistons,
Cutom Gaskets,
Custon Cylinder Port & Head Work,

The pictures are for example ONLY. This sale is only for the short block, it does not include the intake and flywheel that you see in these pictures.

Price: $2,875.00

Thanks John - Jet Ski Haven
john@jetskihaven.com
225-612-5540
www.jetskihaven.com


link to post http://www.pwctoday.com/showthread.php?t=153486

 

[wadman]

link to a part that might be made

Yami motor in a x2 conversion plate interest thread

What I need to know is this . How many people would be interested in an aluminum conversion bedplate for a Yami conversion into an X2,SX,SC,TS,SXI,SXR,JETMATE whatever ? Any input would be appreciated

link to post http://www.x-h2o.com/threads/31677

 

[wadman]

sellers and or manufacturers update us with what you have in stock or what will be ready and when if you would.

 

[madscientist]

thanks for your effort