Lenzi's "backflip hull"

[Marshj]

Look at the backside of this thing?! :bigeyes2: Baby's got curves!I know weve had extensive convos about the rounded corners. But it seems the whole bottom of this hull is arched.

http://www.lenziparts.com/v1.0/Parts.asp

near the bottom..

 

[waxhead]

yeah it has a huge rocker effect on it
i wonder what it handles like

 

[IceRocket1286]

i noticed that as well. how cute. seriously tho, i wonder how it does ride.

 

[yamaslut]

 

[WAB]

That 10mil P/V stroker helps alot also. :bigeyes:
http://www.lenziparts.com/v1.0/images/products/LE0055_g.jpg

 

[RoyalFlush@PCB]

Holy $hit---did anyone see the $27,000 pricetag for a 10mm stroker engine with electrics...:bigeyes:

 

[RoyalFlush@PCB]

That 10mil P/V stroker helps alot also. :bigeyes:
http://www.lenziparts.com/v1.0/images/products/LE0055_g.jpg

I guess WAB noticed...

 

[willycrumb]

Holy $hit---did anyone see the $27,000 pricetag for a 10mm stroker engine with electrics...:bigeyes:

I think I would buy a house If I had that kinda cash to blow.

 

[surfgy45]

agreed. i think sometimes our sport corporate leaders don't like us as much as we like the sport. my buddy just bought a used 2004 mini cooper s with all the add ons for around $25K....thats a complete awesome car. that $27k is for just a motor.:bs2:

just my view...im sure a few of you agree somewhere along the sides with me

 

[waxhead]

It does seem on the expensive side

 

[ketsair]

did anyone catch the $$ of the trim:bigeyes: :bigeyes: :bigeyes:

 

[orange flattop freestyler]

They think just cos its gots lenzis name on it, then they can justify $27K for a motor!!

As said in previous post id rather let magoos build me a better motor for less money, Jetshed built my motor over here for a damm sight less than that. And to be honest whats really that different other than crank, cyl, etc.

Not completely simple granted, but not $27ks worth of rocket science either!!

 

[romack991]

i was hoping to see his gf on the site but no luck:17:

but the link to the japan company came through... :Banane01: :Banane01: :Banane01:

There was one more of her but lenzi had a speedo on too so that was not to be reposted

 

[Jr.]

Yea, I looked at the cost of that also & had to chuckle. But if he gets it, more power to him...................

Just for comparison sake, I took some of his parts pricing along with how I normally charge to build a similar motor, Everything he stated , along with new Full specs, New B pipe modded for valve clearance, & his carbon chamber, MSD TL , Basicly a drop in motor complete ?
I was a little under 16K. Jeesh, & they say stuff here in the States is expensive!!:bs2:

 

[freestylegeek]

I can't imagine what Paul would be able to do to a motor for $27k....

 

[romack991]

Paul,

You had said the carbon pipe lost HP because of its poor reflectivity? What if you coated the inside with that metal paint someone posted about?

http://www.x-h2o.com/threads/382

 

[orange flattop freestyler]

Yea, I looked at the cost of that also & had to chuckle. But if he gets it, more power to him...................

Just for comparison sake, I took some of his parts pricing along with how I normally charge to build a similar motor, Everything he stated , along with new Full specs, New B pipe modded for valve clearance, & his carbon chamber, MSD TL , Basicly a drop in motor complete ?
I was a little under 16K. Jeesh, & they say stuff here in the States is expensive!!:bs2:

So where on earth is the other 11K?:bs2:

Well done Paul, nice little comparison there:wink:

 

[Jr.]

So where on earth is the other 11K?:bs2:

Well done Paul, nice little comparison there:wink:

Where is the other 11K ???? You think little cutties as was posted on the other page are cheap??? I think not!

The parts I listed are what I see in Lenzi's pic. My comparrison is as close to what Lenzi has as I can see. I do know he would use no other carb than a Full Spectrum....... In fact everything Lenzi uses is the very best money can buy. He knows what a quality motor is, no dispute there.


I tried several things with chambers, including SS foil lining them. could not get a good reflection from the Chamber. I didn't like it compared to the Alum ones FPP sells. Oh BTW, someone stated that Lenzi's carbon one looked like dunk............... Here is a pic of the ones Charles was producing for me during the testing............... good old american quality all the way here...........

 

[orange flattop freestyler]

^^^ that carbon chamber is gorgeous, the lenzi one did look like a bit of old yoghurt pot but for performance id rather a stainless one anyway lol

 

[PancakePete]

^^^ that carbon chamber is gorgeous, the lenzi one did look like a bit of old yoghurt pot but for performance id rather a stainless one anyway lol

There was a Red one in My boat for a 100 Hour test of Pancake abuse.
Not one Crack, Held up awesome, looked great when it came out too.
I can say you loose a little power but it is Hardly noticeable. I am going
to say like 80-85% hit off it and regular limited would be like 100% hit
that is still 80-85% better than stock, and all depends what you want
a little power or Purrdy ! :biggrin:

I hope I explained that ok !