300/440/550 Kawi 650 Pump Bearings & Bolts Needed
- Thread starter retroicon
- Start date
tom21
havin fun
- Location
- clearwater FL
kawi dealer- ouch
- Location
- Lanier
ebay for the pump rebuild kit:
http://cgi.ebay.com/ebaymotors/KAWA...26455QQitemZ4606335851QQrdZ1QQsspagenameZWD1V
And a good local hardware store that sells stainless steel metric bolts, I think they are a #6 #1 pitch, but bring your old bolt or one that will fit to verify that.
http://cgi.ebay.com/ebaymotors/KAWA...26455QQitemZ4606335851QQrdZ1QQsspagenameZWD1V
And a good local hardware store that sells stainless steel metric bolts, I think they are a #6 #1 pitch, but bring your old bolt or one that will fit to verify that.
- Location
- Lanier
Then take the pump with you to verify the threads, a "good" hardware store will have a selection of metric ss bolts. Around here we have two great stores local . But usually Ace Hardware has some also.
Wetracer
X
- Location
- Pacific Northwet
dbrutherford
Parts Whore
- Location
- Fairmont, WV
If you need the bearings your best bet is to find someone on eBay offering a rebuild kit.
As for bolts.... There are four allens that mount the pump to the hull. Then there are two M6-1.00's which bolt the tail cone/cap on. Then there are 4 longer M6-1.oo's that hold on the nozzle.
Which bolts do you need? I have all of them you request.....
Also did you buy one os those blue printed or OEM pumps fro msweetemos on eBay?
I see some guy sellign a "special" skat-track blue printed pump on eBay now. Well is also is selling a 4130 chromoly drive shaft claimed to be made by Group K.
The parts look nice but I he is always sellign drive shafts and this is the third pump I have seen him list. I don't think those pumps were blue printed at all! I think he just sharpened the stator veins.....
As for bolts.... There are four allens that mount the pump to the hull. Then there are two M6-1.00's which bolt the tail cone/cap on. Then there are 4 longer M6-1.oo's that hold on the nozzle.
Which bolts do you need? I have all of them you request.....
Also did you buy one os those blue printed or OEM pumps fro msweetemos on eBay?
I see some guy sellign a "special" skat-track blue printed pump on eBay now. Well is also is selling a 4130 chromoly drive shaft claimed to be made by Group K.
The parts look nice but I he is always sellign drive shafts and this is the third pump I have seen him list. I don't think those pumps were blue printed at all! I think he just sharpened the stator veins.....