just another square
- Thread starter brentR
- Start date
WaveDemon
Not Dead - Notable Member
- Location
- Hell, Florida
that is one of my all time favorite cars. what body kit is on it? it looks a little like the cobra but I don't think it is. I see you have the real 5 lug cobra r rims on it. what other goodies?
D-Roc
I forgot!
- Location
- Dirty River Rider
yes its a 701, no porting done.. i would like to thoand yes there is glass across the tray just one layer as of now..
okay cool letme know if you wanna borrow my template.
its the DECH kit, they were big into making foxbodys corner on the auto-x stuff... yeah those are 18" cobra Rs, i just bought a set of prostars with a skinny up front, might sell the cobraRs... as for the goodies, its all stock :haha::bs2: :bs2: :bs2:
sure ill borrow it, is it hard to do lol?
ok i started my hood mod, typical mod for SN... just gotta lay new liner now... not sure how to do it, does it lay on top of the channel for the pole or does it sit above it and sorta 'float' ?? i reglassed my tray with epoxy resin as i found out polyester peals off like nothing... :bigeyes: but its too damn cold to sand it (-5 atm) and lay turf... paint is next... im debating between rattle can camo job or a simple 1 color done by maaco
Attachments
D-Roc
I forgot!
- Location
- Dirty River Rider
my hood liner kinda floated except that one spot almost centre of hood, there i made mine contact it to help sturdy things up. its held up to alot of slams from roll attempts gone bad so far. just forsee where your hood hooks bolt on and lay up the liner to allow you to get the hardware fastenable.
D-Roc
I forgot!
- Location
- Dirty River Rider
okay i can send it out in the mail or ups it tommorrow if you want to pay the shipping. Pm me your address and get ready to grind some shiat!!!
- Location
- Midland, Ontario, Canada
hey bud...I would probably just go with a cheap rattle can job since you will probably be beating on it. I have used both the black and white appliance epoxy paints and have been quite impressed with them. They harden right up and don't scratch real easy. No they don't come in a variety of colors but you could always go all black or white and than go with a graphic kit. Just my 2 cents!
D-Roc
I forgot!
- Location
- Dirty River Rider
Do it, Steve rattled his ski with the DIYS redneck's camo paint kit from Canadian tire. i am not sure how they get three colors in one can but it was right beside the plaid and stripped paint cans :biggthumpup:
Mike W
Infidel
- Location
- North Florida
yup
I never really figured out the red interior. Personally I think it looks like ass. Grey interior is the way to go. If I ever got out of this jet ski thing I'm into I plan on buying another 5.0. Come to think of it I could probably save money if I did.
Anyway, your square looks like it is comming right along. Keep the pictures comming.
Spray paint, it rattles when you shake it
Some peoples paint jobs look really sweet too. I think I'm going to nab one guys color scheme from his roundnose done in rattle-can epoxy appliance paint. It was white with a black inverted oval thing across the front. I forget his name, if he'll post up I've been meaning to ask him. His ski looked sick. I wanted to do something similiar to my sqaure, however a black bottom, silver topdeck, and flat blue inverted oval across the front. I have plenty of time to play with options though, so we'll see.
I'm finishing up my slut mod sometime very soon. I made a template for the handhold cutouts, if you want it lemme know.
Some peoples paint jobs look really sweet too. I think I'm going to nab one guys color scheme from his roundnose done in rattle-can epoxy appliance paint. It was white with a black inverted oval thing across the front. I forget his name, if he'll post up I've been meaning to ask him. His ski looked sick. I wanted to do something similiar to my sqaure, however a black bottom, silver topdeck, and flat blue inverted oval across the front. I have plenty of time to play with options though, so we'll see.
I'm finishing up my slut mod sometime very soon. I made a template for the handhold cutouts, if you want it lemme know.
Last edited:
- Location
- Midland, Ontario, Canada
Lookin good bro...almost there!
D-Roc
I forgot!
- Location
- Dirty River Rider
it looks good but is that head on backwards? my ada has the water outlets on the carb side so the water flows across the engine. not sure if you can turn that around and bolt it back on.