jetting specs

[Shanex-2]

I thought there was a page that had peoples ski setups and carb jetting that worked for them . Does this page still exist ? Where is it located if it does ? And does it cover Kawasaki ?:feedback: If it doesn't maybe we should start one any ski/ any modification/ dual or single carb

 

[chookc]

Excellent idea? chasing some jetting specs for sxr800 as we speak...

 

[Shanex-2]

I will probably move the thread to the drive line section

 

[special fx]

http://www.x-h2o.com/threads/19403&highlight=jetting+specs

 

[Shanex-2]

Thank you . Is that where it was? But how about we expand that to all water craft so using that template to start. Keep in mind these are in no way perfect or set in stone what may work for one person might not work for another you are the end user you must determin wether it will work for you

copy this as a template

brand=
model=
size=
Quantity =
Main Jet =
Pilot Jet =
Needle/Seat =
Spring =
popoff=
Pilot screw =
Main Screw =
manafold =
crossover=
reeds=
- - - - - -
Gas Octane =
Altitude =
Main type of riding =
Would it pass the 10 second WOT test =
Powerband =
model ski=
Motor type/setup =
pipe=
misc=

============


here is mine

Brand = mikuni
Model = silver
Size = 44 mm
Quantity = 2
Main Jet = 130
Pilot Jet = 110
Needle/Seat = 2.5
Spring = 65 gram I think
popoff= 12 psi
Pilot screw =3/4
Main Screw = 5/8
manafold=r/d
crossover=none
reeds=stock
- - - - - -
Gas Octane = 93
Altitude = sea level
Main type of riding = wave jumping
Would it pass the 10 second WOT test = not yet still testing
Powerband = lower to midrange
model ski=kawi X-2
Motor type/setup = kawi 750 stock porting 95 ss small pin stock elecs.
pipe=coffman 650
misc=

============
some may be reluctant to list there set up but this will help a lot of people who are still new to this sport to point them in the right direction.


:thewave:

 

[Shanex-2]

If this thread looks like it will just get buried in the general section then I will move it to the drive line section otherwise I will leave it alone:biggrin:

 

[WaveDemon]

If this thread looks like it will just get buried in the general section then I will move it to the drive line section otherwise I will leave it alone:biggrin:

don't duplicate subjects if you can help it. add to this one.

http://www.x-h2o.com/threads/19403/post-283167#post283167

 

[Shonuff]

Excellent idea? chasing some jetting specs for sxr800 as we speak...

What jetting specs do you need?

 

[chookc]

Pm sent

 

[Shanex-2]

I didn't want to duplicate a thread but that one seemed to only cover superjets and blasters and us Kawi guys where let out I just wanted to fill the gap.:Banane09:

 

[Shanex-2]

brand= mikuni
model=sbn 44
size= 44 mm
Quantity = 1
Main Jet = 140
Pilot Jet = 110
Needle/Seat = 2.0
Spring = not sure
popoff=22 psi
Pilot screw =1.5 turns
Main Screw = closed for now
manafold =R&D
crossover= n/a
reeds=stock
- - - - - -
Gas Octane = 93
Altitude = sea level
Main type of riding = wavejumping
Would it pass the 10 second WOT test = still testing
Powerband = planned bottom to mid range
model ski=x-2
Motor type/setup =95 small pin 750 ss
pipe=coffman
misc=west coast head with 28cc domes

============
well I now decided to test the whole single verses duals debate I have a single R&D manafold and 44mm sbn carb to test with . the engine and every thing else will be the same .:thewave: