Jet Ski Trouble
- Thread starter BobbyK
- Start date
- Location
- Ontario, Canada
After a couple weeks of waiting for parts. I've replaced:
Flywheel
Pick up sensor
Took out the scupper valve and installed a Versi Plug
Installed a second bilge pump since I already had a 3 position switch in the hull
16 cell AntiGravity lithium battery
Went out for a second ride today and didn't have an issue. Only time the bilges kicked in was when the nose went in hard underwater.
I'm getting 150 psi in the front cylinder and 148 psi in the rear. Besides some tuning I'd like to do with the carb I'd have to say I'm very happy with the way things turned out.
Flywheel
Pick up sensor
Took out the scupper valve and installed a Versi Plug
Installed a second bilge pump since I already had a 3 position switch in the hull
16 cell AntiGravity lithium battery
Went out for a second ride today and didn't have an issue. Only time the bilges kicked in was when the nose went in hard underwater.
I'm getting 150 psi in the front cylinder and 148 psi in the rear. Besides some tuning I'd like to do with the carb I'd have to say I'm very happy with the way things turned out.
- Location
- Ontario, Canada
Garmin Fenix 5.
Last edited:
Do yourself a favor and also run a strap all the way over the hood to the tray and install the ratchet on the front dash! Mine sank in the surf about year ago I got lucky we got a strap on it to a ski just before it went down hood came loose from the back prongs also buy a new hood seal from watcon
Sent from my Pixel 4 using Tapatalk
Sent from my Pixel 4 using Tapatalk