Super Jet is my pipe holding me back

[102nd7]

Just did a bore over to a 771 from a 701 and it doesn't really feel any different was wondering if maybe my pro tech black pipe was holding me back. Plus my buddies 730 feels quit a bit stronger as well. Any thoughts of what to do runs good and strong just not as strong as I would have thought it would. Thanks 102nd7

 

[Owen18]

yes. factory b pipe is the hardest hitting bottom end pipe if that is what you are looking for from your ski

 

[102nd7]

I know the b pipe would be a lot better. But I have a new ski to build over the winter and really don't feel like paying for a new b pipe for 2 skis. Any other opinions. And is the pro tech pipe that bad.

 

[Owen18]

what impeller and what ski?

 

[102nd7]

I think its a Solaris 17/12 but not 100% sure. The ski is a 90 sn. Just going to ride till project is done then sell. I'd like it to run dang well when I sell it.

 

[Owen18]

Ok, It should be a "solas" and probably a 12/17 look in the intake and check, a wrong impeller could wreck your bottem end power

 

[102nd7]

I'll take a look see. I know I got 2 bnib 17/12's sitting in my storage shed at the moment. They were given to me when I bought the ski.

 

[iangdesign]

So you built a 771 for a SJ you are selling and want more power out of it while you are currently/will be building another ski? This seems counter-productive and needlessly expensive. Why not just ride the spare ski as you are building up the other ski and put your money into the ski you are not selling instead?

 

[102nd7]

I really don't plan on putting any more money in it. Just thought I would ask if there might be a problem with my pipe on this set is all

 

[agua]

put a b pipe on it, use the protec pipe on the other ski for a while, then swap your 771 and bpipe to what ever ski you want to keep

 

[jetx]

Surprised no one has mentioned it but did you just go from Stock 701 to 771 with no porting. If so that probably why it's not what you were anticipating. Get some porting and get it too breath it will make a big difference.

 

[alex_hockey]

yes. factory b pipe is the hardest hitting bottom end pipe if that is what you are looking for from your ski

If you only knew

 

[munki63]

i ran a 13/17 but i had a b-pipe

 

[102nd7]

I should probably start a new thread on this but. How much water should there be in the water box. If I pull off my pipe I get a good half gallon or so that runs out of the rubber hose connecting the pipe to the water box. That seems like its too much.

 

[550headache]

thats too much. do you have it t'd off going to a pisser? my ski has a a second nipple tapped into the front of the head that also goes straight to a pisser so not as much water is in the exhaust(fx-1 but same motor)

 

[102nd7]

Idk I didn't set it up. I think I'm gonna have to look up the water routing for that pipe. And redo it

 

[MileHighJSC]

If you only knew

Tell us.

 

[ajmps1]

you should take pictures and post them, most of us just skim till we see pics and read from the captions.