Freestyle Interchanging PFP/TNT/RRP

[SmittySX]

Id like to know which chambers work with which manifolds.
Im mainly interested in knowing if the RRP and the PFP chambers and manifolds are interchangeable.

Thanks in advance.

 

[Harbor]

The rrp manifold has a reducer pressed into it to reduce the outlet dia for the rrp chamber. The rrp chamber and manifold butt nearly together but chamber does not go into the manifold.

The pfp chambers has a sleeve that goes into the larger diam pfp manifold... (It has no sleeve pressed in)

Remove or bore out the sleeve to use a pfp chamber with a rrp manifold...

Add the sleeve to use the rrp chamber with a pfp manifold, and add spray bar hole to manifold

 

[clouse22]

I would also like to hear from people who have used the TNT chamber (v1-v2 or v3) with the powerfactor manifold

 

[tntsuperjet]

If you have pfp manifold you need one the the chambers with the long flange.
If you have the short flange pipe you will need to make in insert for the manifold

 

[FlyinRyan324]

I would also like to hear from people who have used the TNT chamber (v1-v2 or v3) with the powerfactor manifold

Bobby, I'm running the PFP manifold with my new TNT chamber and it rocks on my TPE 900!


Sent from my iPhone using Tapatalk