impeller for 148 zxi pump in EME Micro

ironman2011 · Feb 1, 2014

need some help guys. I have managed to retrofit a 148 pump from a 1100zxi into an EME Micro hull. Ported Kawi small pin 750, R and D intake, Sudco 42 mil carb. Milled and reshaped head, R and D exhaust, Stock electrics, and a light and balanced flywheel. The prop doesnt look so good, a little bent up, not to bad, but still bent. Any suggestions for props, I was thinking about 8 - 16. Dont need top end with this litle ski, all bottom end punch.

Chris03HD · Feb 1, 2014

Sounds sweet. Pics?

vshockey10 · Feb 3, 2014

my brawler last season had a 701 61x and a 7/12 skat swirl in a 155 oem yamaha pump just FYI might help

special fx · Feb 3, 2014

I'm running a 148 zxi pump in my FX1. I'm running a 11/17 solas swirl and a 87.5mm nozzle. I'm running a Dasa 850 with a single 46. I would suggest a 9/15 or 10/16.

impeller for 148 zxi pump in EME Micro

ironman2011

Chris03HD

vshockey10

special fx

X