I'll be in Houston next week, who can hook me up?
- Thread starter SuperJETT
- Start date
The Penguin
triple secret probation
- Location
- down by the river
P-diddly is in charge of making a decision. Ya'll tell me where to be and when to be there.
parrdaddy
No he will not!
- Location
- always be a TEXAN!
The Penguin said:
Ahh, I guess I didn't get the memo nominating me as the official decisionser maker personel director :dunno:
I just need to know what time you guys will be @ Egret, then I'll see you there :cheer: Either day or both, how about all threeeeeeeee :biggthumpup:
So, I'm at the airport, our plane isn't even here yet and WE WERE SUPPOSED to leave in 15 minutes. It's estimated to be here around 8. I hate air travel.
Anyway, so we're riding tomorrow?
Just talked to piddly-diddly, so we're riding tuesday night, around 6-6:30 at Egret Bay, wherever that is.
Maybe we can go out to eat Wed. night, but not required. You guys may be sick of seeing me by then anyway and wanting to send me back to Louisville.
Anyway, so we're riding tomorrow?
Just talked to piddly-diddly, so we're riding tuesday night, around 6-6:30 at Egret Bay, wherever that is.
Maybe we can go out to eat Wed. night, but not required. You guys may be sick of seeing me by then anyway and wanting to send me back to Louisville.
The Penguin
triple secret probation
- Location
- down by the river
I'll be there at 5:30ish
since I can't stand traffic, I'm going to leave work early...and still get stuck in traffic
since I can't stand traffic, I'm going to leave work early...and still get stuck in traffic
michael950
for me to POOP on!
- Location
- Houston, TX
The Penguin said:
That, I do not miss.
The Penguin
triple secret probation
- Location
- down by the river
awrighty - I got my newish bilge bracket mounted, so my bilge pump is in it's proper place by the drive shaft - I feel very good about that :biggrin: the previous owner had it mounted between the gas tank and stator cover
If I can find some socket head screws tomorrow I can put on the jet dynamics intake I bought. I really want to try it out...any idea where to find the screws locally?
the ski and cart loaded in the truck - see ya'll there! I'm planning on being there about 5:30 or so, traffic dependant of course
If I can find some socket head screws tomorrow I can put on the jet dynamics intake I bought. I really want to try it out...any idea where to find the screws locally?
the ski and cart loaded in the truck - see ya'll there! I'm planning on being there about 5:30 or so, traffic dependant of course
parrdaddy
No he will not!
- Location
- always be a TEXAN!
The Penguin said:
Kemah hardware has a good selection of stainless metric, but they close @ 5:30 :tomato:
So I wasn't the only one working on the ski in a mad thrash to ride today.
Thanks Diddy for the help on cleaning the carbs and the gasket.
Premix- Thanks for the knowledge and effort Saturday working on every conceivable mixture settings trying to dail these in. Turns out we were fighting a hairball in both of the fuel filters, and a little corrosion here and there. We will see how they work tonight.
Thanks Diddy for the help on cleaning the carbs and the gasket.
Premix- Thanks for the knowledge and effort Saturday working on every conceivable mixture settings trying to dail these in. Turns out we were fighting a hairball in both of the fuel filters, and a little corrosion here and there. We will see how they work tonight.
The Penguin
triple secret probation
- Location
- down by the river
where is Kemah Hardware?
Prem1x
Tinkering obsessed
- Location
- Austin, TX
I'm glad you found something in those carbs. It was weird how the high-speed screws never seemed to affect the performance no matter which way we went.
BTW, I'm out on riding tonight. No skis. And there's still packing to do, so I'll be at home doing that...
BTW, I'm out on riding tonight. No skis. And there's still packing to do, so I'll be at home doing that...
The Penguin
triple secret probation
- Location
- down by the river
excuses, excuses
NelsonLt1
XXX
- Location
- Shoreacres, TX
The Penguin said:
If your going south on 146, over the bridge, it is on the left side just past t-bone toms and the light.
I'll most likely be there about 6
LUKE
NelsonLt1
XXX
- Location
- Shoreacres, TX
If you know what size you need I can pick some up for you, I'm going over there in a few. Just call me 281-610-9063.
LUKE
LUKE
The Penguin
triple secret probation
- Location
- down by the river
I don't know what size
Sears Hardware on Fuqua has some regular steel ones - they'll do until I can get back to Crystal Beach and go to the hardware store there. I know they'll have what I need.
Sears Hardware on Fuqua has some regular steel ones - they'll do until I can get back to Crystal Beach and go to the hardware store there. I know they'll have what I need.
Moondance
Just plain me....
- Location
- Ridin' the Crazy Train
The hardware store/grocery store/souvenier shop/gas station? That one:cheer:The Penguin said:
Last edited:
The Penguin
triple secret probation
- Location
- down by the river
you forgot Radio Shack
yes that one
yes that one
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
yeah, that one.........
go to Lowes, they have a good selection of stainless metric hardware, they are in the pull out drawer sections.
go to Lowes, they have a good selection of stainless metric hardware, they are in the pull out drawer sections.
Moondance
Just plain me....
- Location
- Ridin' the Crazy Train
Oh yeah...radio shack. I think there's a taxidermist there too:bigeyes: Or maybe they just have to store big "cold" things.....I was a little skeered when I had to go into the big cooler to get ice:sneaky:The Penguin said: