SX/SXi/SXi Pro I took a 650sx nozzle and turn nozzle . And mounted it on my sxi pro pump.

7

701SJFMT

Location
Whitinsville, Mass
I heard of people boring out there nozzle on the pro. Or putting an sx or sxi nozzle on there pro , for more lowend. I had a 650sx nozzle and turn nozzle in my shed. For an example , i cant get my fist into the nozzle on the pro . but the sx650 nozzle i can fist it . lol.... So i instailed the 650 nozzle and noticed i had to trim a little bit off the turn nozzle were the stock bilge bump out is on the nozzle . I made shore the turn plate bottomed out before the nozzle did. The stearing cable mount on the 650 nozzle is closer than the one on the 750. So that being said . The steering cable is at an angle now , but is still smooth and doesnt bend or bind up . well alls i can say is im very pleased with the result and it gave a very noticable diffrense in the lowend thrust . It also didnt effect my top speed, it got me there faster. Im waiting for my Blowsion freestyle cone, It should be hear shortly. The cone should make it alot thrustier to.
 
7

701SJFMT

Location
Whitinsville, Mass
The pump cone deffinetly made a diffrence also . I did lose 5 mph off the topend with the pump cone and pump nozzle's. but that doesnt matter . I dont realy care about topend speed. I want to move quickly in a very short amount of time. The best mod from what i hear is the Factory B pipe is huge. Ive heard it can give up to ten more hp.
skijunky said:
Make sure and post how the cone works out for you! At 230lbs I need all the bottom end punch I can get! Already shopping for a 650 nozzle setup for mine!
Click to expand...
 
You must log in or register to reply here.
Top Bottom