bored&stroked
Urban redneck
- Location
- AZ
Doing some swapparu's with parts over the winter and just curious where I should start.
-Putting a 760 cylinder [thats going to get a light home porting] on my raider, so it'll basically be a 760 motor but with dual 38's. Go up, down, leave the stock 67.5/120 jetting the raider comes with? Ski is stock otherwise.
-Putting 760 cases and carbs [dual 44's] on my superjet. Thats a 61x punched to 84mm, freestyle porting, 190psi, protec pipe. It'll have pods vs the oem carb cover. I'm thinking reverse jetting this setup, never done that before.
-Putting a 760 cylinder [thats going to get a light home porting] on my raider, so it'll basically be a 760 motor but with dual 38's. Go up, down, leave the stock 67.5/120 jetting the raider comes with? Ski is stock otherwise.
-Putting 760 cases and carbs [dual 44's] on my superjet. Thats a 61x punched to 84mm, freestyle porting, 190psi, protec pipe. It'll have pods vs the oem carb cover. I'm thinking reverse jetting this setup, never done that before.