Hull building

[Jlg]

I’m about to buy a set of moulds for a ski and I’m wanting a few tips on building the hull from the moulds by someone who’s done this before

 

[Midlake Crisis]

What molds are you buying?

 

[Jlg]

I don’t want to disclose that until I’ve got them but it’s for a freestyle standup

 

[CARBONX2]

Message me with questions, I make my own moulds and hulls. Worked my way up from wet layup to vacuum bagging and now infusion.

 

[E350]

CARBONX2 would mind if I also messaged you about infusion? I have laid up fiberglass whitewater kayaks in my youth and do some repair and rework on our boat(s), shower pans, etc., but now I want to take a mold off our X2 hull and design a pole deck for it. By your user name, I assume that you have already done that on at least the hull. I feel quite comfortable with fiberglass work but have the equipment to do hand layups only. I have been looking at supplied air respirators on ebay.

 

[CARBONX2]

CARBONX2 would mind if I also messaged you about infusion? I have laid up fiberglass whitewater kayaks in my youth and do some repair and rework on our boat(s), shower pans, etc., but now I want to take a mold off our X2 hull and design a pole deck for it. By your user name, I assume that you have already done that on at least the hull. I feel quite comfortable with fiberglass work but have the equipment to do hand layups only. I have been looking at supplied air respirators on ebay.

Sure