Super Jet Help please Fast!!!!!!!!!!!

[Mark44]

r

i prob need new orings on my head also what would that run and were would i get that

Measure what you have and get them from McMaster Carr.

 

[lcgordon]

I guess this is why i have three skis

 

[lcgordon]

I cant get the nut off the cylender or the bolt out of the exhaust so i can reach the nut any help here

 

[5bulldogs]

I cant get the nut off the cylender or the bolt out of the exhaust so i can reach the nut any help here

You will need to destroy a 12mm wrench to get that riva exhaust off. This is the wrench I use for all the riva pipes.

 

[lcgordon]

alright i got the nut off about the most rigged way possible but how do i take the cylender off i got all the bolts out do i just pull hard?

 

[lcgordon]

i need to make one of thoes also thanks

 

[Mark44]

alright i got the nut off about the most rigged way possible but how do i take the cylender off i got all the bolts out do i just pull hard?

You may need to tap on it lightly and pry it off the case.

Mark44

 

[lcgordon]

ok thanks will do

 

[lcgordon]

got it off the gasket tore when i pulled it off not sure if it always does or if it was bad would have replaced it anyway?

 

[Mark44]

yes replace.

 

[nightrider05]

When you are sticking money into new parts, don't cheap out on gaskets. The gaskets are cheap compared to what a new rebuild could cost due to you cheaping out on gaskets on the last build.

Let me know when you order...I can help you out on prices for the new stuff.

 

[lcgordon]

Thanks man ill let you know Do you know were the best place to get the cylender work done.