has any one used a TMB fly wheele in their 701

[DezKnotz]

has any one used a TMB fly wheele in their 701, if so how was the power difference copared to stock or a rad

 

[SUPERTUNE]

Much better than any 61X or 62T stock flywheel. TBM/RRP billet flywheels are only for the '96-up 62T ignition systems.

 

[cambo au]

i have one and love it would recomend it

 

[restosud]

chuck,do you think it would work with a vilder cdi?

 

[BruceSki]

i just put one in the other day and did lightened couplers at the same time.


i noticed a difference... it definitely revs up quicker on the bottom...

i want to do an enhancer next and see if thats worth anything

 

[DezKnotz]

i have a rad fly and enhancer in my 02 sj know and it a great combo i think iam going to try the tmb in my 96 blaster to try to give it more bottom end. i have a riva red pipe on it and its a little sluggish on bottom rite know.

 

[SUPERTUNE]

I did run a few Vilders with Jetinetic's flywheels, but the timing was way off, so I set one curve set to 21 degrees from 1500 rpm to redline and set the race curve in curve set #2, ran it in curve one and adjusted stator until i got it to 21*, then set it on curve 2 that had my aggressive curves, Just make sure you use NGK resistor sparkplug caps and R resister plugs. Set gap to .024

 

[restosud]

is it just the base timing that changes or does it jump around as well anywhere in the rpm range?