handpole Spring matter

[iptamenos]

guyz
i am using xmetal handpole and xmetal low bracket with dual tube system
i want to install a spring the handpole is to tight and heavy how i can do?:wizard:

 

[Air Biscuit]

This should work for you. Its using a stock pole but should be the same concept.....

http://www.x-h2o.com/threads/29389&highlight=xmetal+bracket

 

[iptamenos]

thanks helps me a lot
the problem is that x metal handpole don't have hole for the spring i must reinstall it and modified it \

 

[Air Biscuit]

Yea Ive never seen a x metal pole in person so I didnt know what it would look like. Theyre made to run springless w/ the bracket right? You could prob weld something up to hold the spring in place but Idk how how crazy you'd wanna go to run a spring. But if theres a will theres a way lol. Good luck

 

[munki63]

i don't know about x metal but i put in my blowsion bracket with my RRP pole and i found that taking apart the bracket made in 1000x easier , you will probably need an extra set of hands, if the spring is too strong after you get it all assembled tie the pole in the down position and heat the fart out if it, the more you heat it the less effective the spring will be

 

[orangefinger]

let me know what your plans are x-metal pole with x metal braket and spring...I am very curious for a easy solution, heating and welding the spring to get it to fit in the hole is not so much the problem, it is the other end within the pole...

 

[Sospikey]

Check this out:

http://x-h2o.com/showthread.php?t=29389&highlight=lowered+spring

http://x-h2o.com/showthread.php?t=42797&highlight=running+spring&page=2