GPR Total Loss compatilbility

[Seb62T]

Hi,

I have the opportunity to get a GPR Total loss...
The GPR have only one more cylinder thant my superjet...

And I think the flywheel is the same.

I wonder if I could adapt this TL on my superjet using only two triggers and two coils... The brain is, I think a 42360. Is it the digital one ?

Seb

 

[Matt_E]

All parts except for the stator plate are identical. FLywheel, coils, triggers, brain, all the same.
Get a 701 stator plate, and you're good.
Actually, the GPR plate will work, but you'd have to drill & tap new mounting holes for the triggers.

 

[Seb62T]

All parts except for the stator plate are identical. FLywheel, coils, triggers, brain, all the same.
Get a 701 stator plate, and you're good.
Actually, the GPR plate will work, but you'd have to drill & tap new mounting holes for the triggers.

Okay I can get spare parts with the third trigger/ignition coil !
the stator plate should have three triggers (120 degrees) instead of two (180 degrees)... I will see if I can get a twin plate.

Thanks for your answer.

 

[bad93blaster]

flywheel is different. the stator plate mounts on the flywheel cover and i beleave there is only 2 pickups

 

[Matt_E]

You can still use that flywheel and run a 760/1200 flywheel cover.

And I assure you, a 1200 will have 3 pickups.

 

[bad93blaster]

You can still use that flywheel and run a 760/1200 flywheel cover.

And I assure you, a 1200 will have 3 pickups.

i was thinking the mags on the flywheel my bad. i run a gpr flywheel with a riva/rad cover