Super Jet Give me your opinion on more mods please!!!!

CANDYANDCHROME

CANDYANDCHROME

Location
Rochester
Ok here is the deal... I have a 2008 superjet I ride in lake ontario so its not exactly flat water.... Average of 2 to 3 foot waves but this past weekend were 15 to20 footers.....Not too worried about weight


My mods

Blowtion intake great
0 degree blowtion bars
Factory b pipe mod chamber
Ada head (195 psi)
Builge pump
Odi grips
Blowtion gas cap and filler neck
After market fuel line and filter


This winter im doing foot holds and turf...

I dont want to go too extream with engine mods because i want it to stay bullet proof but i was thinking about pulling the motor and reinforceing the engine compartment and im going to tap my pipe for more cooling but im just going to T off of the one line comming into the hull....is this a good idea or do i have to tap my pump too? Im never in water warmer than about 70 degrees. I plan on the small things like levers and maybe a steering system.... Any other ideas guys?
 
200%Absolut

200%Absolut

Location
Corsica FRANCE
As your ski is a 08 no need to swap prop 08 prop a hooker look a like very very good prop. i've swaped my 9/15 hooker for one and i really love it .

shortening the pole .no need as 08 pole are fx1 pole .

short pre 08 pole is a great mod to have more throw. with a pre 08 cable .

dual taping the manifold is a good mod to equalize cylinder temps . keep one line from the pump no need for more.

next mod if you want more brap :

lightened flywheel from #Zero
timing advance
jetworks valve.
 
You must log in or register to reply here.
Top Bottom