FX-1 FX1 144mm pump swap.

[Wave Chaser]

I have since found that a stock Wave raider Steering Nozzle is Mid mount and will work but you have to either get the pro-tech bolt kit for the spacers or you can make your own spacers to fit.

 

[DangerBoy]

the trim set up from a raider is the final ticket it allow you to run a short rideplate and adjust the ride height of the nose by adjusting thrust angle


I have a threaded rod to the trim ring and it adjusts with the nut you see here

 

[PowersportComposites]

Cool

 

[Flash-FX]

144mm pump/trim lowdown....my version http://www.x-h2o.com/threads/32557-FX-1-144mm-trim&highlight=

Still running the same setup today...