Super Jet fuel + water hoses

[D-Nice]

im looking to get colored fuel and water hoses to pimp out my engine compartment befor i put my motor back in. anyone know any place cheaper then blowsion and also a round about on how much length i need for each size?? gonna be runnen dual cooling on a jetmaniac 771 big bore with a b-pipe and 2 pissers, and dual carbs

 

[OCD Solutions]

I will say the same thing I say everytime I see someone post this up...save your money!!!!!

I made the exact same statement as you less than 3 years ago and wanted to match all my lines. I ended up changing them several times now and am right back to OEM fuel lines on both my skis. There is nothing that performs better than OEM fuel and water lines and changing them is a waste of money.

If you still insist on changing them, remove them very carefully and put them away somewhere safe as you will need them again. If you don't have enough OEM stuff to plumb your new setup, PM jetmaniac or ask others to cough some up, it will be much better money spent.

Looks aren't everything, reliability is key!!

 

[tor*p*do]

advance or autozone for cheap black fuel line
lowes or home depot for fiber reinforced pvc clear water line
save your $$$ for worthwhile improvements to your ski

 

[D-Nice]

yea i here ya. didnt know there was a performance/reliabilty stand point on em. ill take ur word an keep oem. aint tryin to skrew up a fresh motor

 

[Mikeyk001]

I recently picked up some water hose from mcmaster-carr. The part number for the hose is 5288K125, i ordered 15ft of blue and have a few feet left over. Also ordered some hose clamps, part number 5435K16. The clamps said you need a special crimp tool, but I used a crappy dull pair of side cuts and they worked fine. Cost $19 for the hose and $5 for the clamps...

 

[OCD Solutions]

The water hoses are pretty forgiving and yes, you can actually use just about anything for them, my statements were meant more towards the fuel lines.