fuel and cooling lines

[94SJrider]

What is everyone useing? I would like to have red cooling and fuel lines. I know OEM is the best for the fuel line but its just too ugly and i dont mind changing them. Any suggestions?

 

[Mike W]

I use fuel line from NAPA and braded water line from Home Depot.

 

[Mark44]

Tygon tube for fuel 3/16 and black water line from NAPA is what I use.

Mark44

 

[#ZERO]

Stock lines seem to work the best for me.

I tried the tygon fuel hose but it always leaked around the short brass inline primer fitting.

Silicone hose works well for the water lines and it doesn't melt around the stinger water inlet but it's expensive.

I might have to go check that NAPA stuff out too.

 

[94SJrider]

has anyone used this stuff? http://cgi.ebay.com/ebaymotors/20-F...yZ124114QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

i dont plan on running it on the pulse line just to be safe.

 

[yamaslut]

Mc Master Carr has Tygon (yellow) 1/4" fuel line and 3/8" water line. Tygon F-4040-A Tubing

I got 8ft of fuel and 10ft of water line and it worked out perfect..

approx. 30$

goto: www.mcmastercarr.com

 

[Kny21]

For the cooling line you can get Air hose..... they have it availlable in red and a few other colors from what I've seen..... local stores around here (Ace) have blue.