jdakrt
X
- Location
- Central VA
Needs to be in decent condition. little/no corrosion. adding to a 46 I have here, so if you have a triple or double set and want to seperate let me know.
Found please delete
- Thread starter jdakrt
- Start date
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Dont think there has ever been a set of OEM 46's which would have a slave carb.
jdakrt
X
- Location
- Central VA
Sorry if this is not clear. Looking for a 46 SBN to add to one I have here. Its not a wetjet carb, so I guess we would call this aftermarket. What I'm referring to is the one I'm looking for does not need to have spring or threaded for wheel.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Unless you can find an identical carb to the one you have, this could end up being a pain to get dialed in. Carbs of same size can be made for different configurations. Just be sure what ever carb you find is identical.
All Mikuni 46 carbs start with the wheel and spring setup. Then you remove the nut, wheel, spring, etc from the shaft. Cut the threaded part of and add a coupler to make it into a slave cab.