Footholds & re-turff advice needed

[Gainera2582]

Bumping this thread up bc I dont feel like starting a new thread:

How much foam will I need for my wcf foothold and scupper install on a sj? I know Im supposed to get the 4lb density, but how much will I need?

 

[steve802cc]

its hard to tell, but there is a 3/4'' air gap in the foam, its like they filled the bottom with foam then the top and then assembled the two halfs.

I've seen that before. My current ski was hollow under the tray above the pump. Also my buddies ski was hollow up in the front of the tray which caused the tray to crack:261: .

Steve

 

[hangtime]

Bumping this thread up bc I dont feel like starting a new thread:

How much foam will I need for my wcf foothold and scupper install on a sj? I know Im supposed to get the 4lb density, but how much will I need?

If you buy the Blowsion kit which is a pint kit (2 pints ,1 of each material ) it will be plenty for what you need .:headbang:

 

[brentR]

ill be doing this soon, i get the fun of ripping off old stock turf on my SJ .. boo

 

[Mark44]

d

Hammer,
Where do you live?
If you are close I can help you with this and guide you through it.
I am in St. Louis.

Mark44