Super Jet Fixed Steer Squarenose

[H2OHAZARD]

who makes those adapters for your 1 1/8 bars?
thanks

 

[BruceSki]

Hard to tell in the pics but I had the UMI top stop and the adaptors machined flat. I didn't like the way the bolts looked with the round lip for the 7/8 part of the adaptor there. Figured I would break it quickly. Big thanks to Madnessmaker for that one.

I lowered my tray about an inch too. Cut the whole bottom of the tray out but left the footholds mounted right where they were. Found some real shoddy glass work and the footholds were elevated from too much foam on the previous owners install. Found some cracks and fixed all of them too. Cut off the rear bond line because it was a mess. Inside the tray was wet but I don't care. It's a surf boat. The heavier the better.

Part numbers for the bars and adaptors are from speed demon bikes.com

http://speeddemon.ca/

MS0183 adaptors
MS0113 bars

 

[ChadGnarly]

Fixed steer fo life

 

[ProSouth]

bruce, have you ridden anything the 701 steering setup? i have umi on my fixed steer also, and was debating on selling it... and getting the 701 industries setup

 

[Byeai]

I rode zimmys blaster with the 701 steering it was nice

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

 

[BruceSki]

I just upgraded to UMI from stock raider! Why you wanna spend more of my money? Lol

With brand new bearings and a new steering cable it's so smooth it feels like its broken.

We have a guy in our crew that just put 701 steering on a blaster so I will check it out once his ski is up and running.

 

[ProSouth]

cool! i was going to switch just for the fat bar setup, but of course adapters werent on my mind. good idea Bruce.

 

[ProSouth]

btw, those look like the TUSK fat bars, price is about right

 

[H2OHAZARD]

Hard to tell in the pics but I had the UMI top stop and the adaptors machined flat. I didn't like the way the bolts looked with the round lip for the 7/8 part of the adaptor there. Figured I would break it quickly. Big thanks to Madnessmaker for that one.

I lowered my tray about an inch too. Cut the whole bottom of the tray out but left the footholds mounted right where they were. Found some real shoddy glass work and the footholds were elevated from too much foam on the previous owners install. Found some cracks and fixed all of them too. Cut off the rear bond line because it was a mess. Inside the tray was wet but I don't care. It's a surf boat. The heavier the better.

Part numbers for the bars and adaptors are from speed demon bikes.com

http://speeddemon.ca/

MS0183 adaptors
MS0113 bars

great ty!

 

[BruceSki]

Today is the first ride on it this year. I think it should ride way better with the lower/padded tray, wide bars, UMI steering, brand new steer cable and correct pump shoe.

 

[ProSouth]

Looks great Bruce, now I'm really upset mines still apart. Should ride like a new ski

 

[ChadGnarly]

Looks so sick.

 

[BruceSki]

Thanks! I'm really happy with everything. Missed that 771 power. Been riding a 650 square this season.

 

[ProSouth]

howd she ride? how do you like the sweep on those fat bars?

 

[BruceSki]

The sweep is great. Needs maybe -1/2 inch more cut off on either side and that's it. And a throttle wheel. My square throttle cable has no more adjustment right now. It's a little tight.

 

[ProSouth]

:veryhappy:

 

[MCrider]

:wall:You need to finish that thing.....

 

[BruceSki]

Nice!

 

[ProSouth]

Yes, yes I do need to finish it. It's too fun not to freaking ride it.

 

[Little Trumps Super Jet]

looks good dude! prosouth is to addicted to his bob to finish his fix. did you make those glass enclosures for your footholds bruce?