Super Jet Electrical help

Location
CT
I was loading up to ride today and I went to start my ski to make sure it was good to go and "CLICK" I try again and "click". I pull it apart and check everything. My battery is fully charged. My grounds are good. I jumped my solenoid " which was what was clicking" and I still have nothing. I'm getting power to my starter. Is my starter shot? I have a new solenoid and tried that. What else can I check before I need to pull my starter? Thanks
 

Dmac80sc

Site Supporter
Location
Here
If you jump the solenoid and the starter doesn't turn over then it most likely is the starter. That is giving power right to the starer so should turn over. You can try and jump right from the battery to the starter though and make sure.
 

Philip Clemmons

Owner, P&P Performance
Location
Richmond, Va
Verify starter ground is good by running a decent jumper from starter to battery negative. If you have power to the starter and a good ground, it's time to pull it.
 
Top Bottom