Super Jet Easiest mods to do backflips and barrel rolls

[andrewlanoue]

Hey guys ive posted a few times on here and after watching YouTube videos I wanna be able to do what they are doing just need to know what to put on my jet to help it do that stuff. I have the engine out right now to replace a seal around the crankshaft so I thought I might as well do stuff now. So what do you guys recommend for modding my 91 Superjet?

 

[slamb33]

you want to do a flat water backflip on a square nose superjet? is that correct?

 

[backflip765]

chop the rear of the ski ! sorten the length and reduce the side walls on the hull, this will give less back end in the water, getting the nose up. giving the front end a bigger rocker will help it up the wake/wave to get the ski over. making it as light as poss will also help, and having a big set o balls !!!

 

[andrewlanoue]

Flips and

you want to do a flat water backflip on a square nose superjet? is that correct?

Doesnt have to be flat water, no! But if so all the better.

 

[Yellofury]

Lake Shafer is a blast! used to hang there a lot in the summers by lowes bridge area. If I make it there this summer I will look the the SN doing backflips!!

 

[andrewlanoue]

Lake Shafer is a blast! used to hang there a lot in the summers by lowes bridge area. If I make it there this summer I will look the the SN doing backflips!!

It is a pretty good time. Let me me know if you come this way this summer I'll show you around the lake.

 

[Scraggly]

If your going for
Rolls an your on a stock ski the best thing you can do is get more throw out of the steering. Move the pivot inside on the nozzle and out at the plate. There's a bunch of threads here about quick steer mods.

 

[motoman96]

$$

 

[scootinhooten]

Trim system

 

[Paulito]

maybe a low end prop?

 

[zzylstra]

And more $$$ lol

 

[slamb33]

$$

More like $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

 

[Scraggly]

Not all true guys. Plenty of guys have rolled stock skis or limited skis. Now f/w back flipping is a different story. But there are tons of f/w tricks he can do to get more experience. It's not all back flips or flops to riding a ski.

 

[slamb33]

Limited 701 barrel roll, definitely. Stock SJ hull backflip? That would take a lot of motor, if even then.

 

[zzylstra]

Honestly, I've spent well over 8k on a ski that is able to do this stuff.... Built it all myself

 

[Nose Bleed]

Get a helmet and start beating yourself up for a few hours everyday on the water. You'll get it without spending huge money

 

[Matt_E]

Honestly, I've spent well over 8k on a ski that is able to do this stuff.... Built it all myself

Let's see you fw flip it then.

Have you rode it yet?

 

[zzylstra]

I've got about two hours of ride time on it so far without turf (ran out of funds). Still need trim. Once I get it all and some bugs worked out you guys will be seeing some videos