Super Jet Dual cooling for stock pipe?

[Rushford_Ripper]

How can you route the water lines for dual cooling with a stock exhaust? It will be a 62t motor if that info is needed. Anyone have a diagram?

 

[Ducky]

Do you really need dual cooling for stock motor with stock exhaust?

 

[txsuperjetfreak96]

X2 cause more issues than its worth. Running it to cool

 

[CRJ]

you'll run into overcooling problems and the motor not getting up to temp. keep the pipe dry and the motor hot for good power.

 

[Rushford_Ripper]

I only ask because I have the ski plumbed and pump already setup for dual. I'd rather not block it off. Maybe I will just run one straight to the water outlet

 

[CRJ]

Cap it and send that water out the back!

 

[Rushford_Ripper]

Couldn't I run it this way as parallel cooling? Wouldn't adding the T inline just before the pipe dry it up enough to keep at normal temp?

 

[yamanube]

Just run the two incoming lines into a Y or T into the single fitting on your pipe.

 

[Rushford_Ripper]

Yeah I guess I will just do that and add one at the bypass end too so I can utilize both water fittings