Custom/Hybrid dip switch guide for TL

[D-Roc]

It is what it is on the multi channel. No -5 degrees. To find your true tdc of the dwell time you can zero your dial indicator close and then turn forward 10 degrees and then back to 0 and then - 10 degrees and note the difference on the dial indicator. Using this method you can adjust your dial indicator to read 0 at the centre of your dwell time. It should not be out by a degree in stock stroke but gets you a bit more accurate.

 

[steve711]

The newer Multi channel doesn't have that "feature"

Ok , Thanks

 

[steve711]

It is what it is on the multi channel. No -5 degrees. To find your true tdc of the dwell time you can zero your dial indicator close and then turn forward 10 degrees and then back to 0 and then - 10 degrees and note the difference on the dial indicator. Using this method you can adjust your dial indicator to read 0 at the centre of your dwell time. It should not be out by a degree in stock stroke but gets you a bit more accurate.

Thanks for the tech advice .