defoaming quick question

[danjrowan]

ok, defoaming is in progress
both of the tray walls are out and all of the foam reachable is out.
the question is, how do i defoam underneith the front of the tray?
do i have to cut the bottom out too?
cheers
Dan

 

[Matt_E]

I cut out a small panel in the front of the tray.

 

[C-Rock87]

I cut out a small panel in the front of the tray.

x2, cut a small rectangle or square on top in the front of the tray

 

[danjrowan]

im thinking about cutting the whole bottom of the tray out so i can also seal all of the hull inserts and seal the rear bondline
any thoughts?
thanks for the help
Dan

 

[JonnyB]

im thinking about cutting the whole bottom of the tray out so i can also seal all of the hull inserts and seal the rear bondline
any thoughts?
thanks for the help
Dan

thats what I did with mine

 

[Boris]

I cut the sides and bottom out in one piece.
Was a snap to defoam, seal up and to reinstall.

The only way to fly. :biggthumpup:

 

[danjrowan]

you have done a nice job there
but i see that you have left the area where the inserts are
any reason?

 

[subnsxr]

Are you refoaming? Any weight advantages with this process? I'm thinking of doing the same on my SXR to remove the wet foa and excessive glue and other materials.

 

[subnsxr]

I forgot to say, great pics! Thanks