SOLD Dasa R&D 820cc short block

SmittySX

SmittySX

Location
Cleveland, Ohio
Was saving this for a build but i simply don’t have the time or energy this year. I received this engine with something else i bought. I was told It was pulled from a running ski. Everything looks and feels tight. I would run this personally without hesitation. One power valve cap and spring will be needed. They are OEM Seadoo and can be purchased for about $30 on eBay.

Dasa 820 6mm stroker. 84mm bore with 64x pistons. 210psi per cylinder

SOLD

7A6C9939-5B54-4F89-ADED-4CE7AEAA2B8D.jpeg29AB9041-602C-4B1E-8C9D-E6718FB4CF1F.jpeg0E4633F5-A4A8-4CB1-ABA0-B27E8111FF33.jpegBFF63501-AAFF-41F1-BAA4-800C663C332D.jpeg99AD48AF-F22E-4527-BD1D-267B119E789C.jpegB5FE3189-960B-4446-824C-68FE7BB28A7C.jpegBA3CC665-633B-4D92-90C1-A762F5354B50.jpegCF226287-F666-4433-AA1A-328F2C9DC871.jpeg
 
Last edited:
Kaylee.S

Kaylee.S

Location
Redondo Beach, CA
SmittySX said:
It came from a freestyle hull. I believe @Kaylee.S has flatwater flipped hers in a glass hull.
Click to expand...
Yep! These little motors rip. Mine was built and ported by Erik at TPE. it was an 8 mil, 812cc at about 210psi. Ran 100 octane pump/race gas mix. Msd enhancer and a b pipe and i was able to flip it.

Also, Dasa will machine the cylinder to accept the new style low profile power valves for free. Just send it to them, buy the PVs, and they update it.
 
C

Curls-43

Location
Long Island ny
Kaylee.S said:
Yep! These little motors rip. Mine was built and ported by Erik at TPE. it was an 8 mil, 812cc at about 210psi. Ran 100 octane pump/race gas mix. Msd enhancer and a b pipe and i was able to flip it.

Also, Dasa will machine the cylinder to accept the new style low profile power valves for free. Just send it to them, buy the PVs, and they update it.
Click to expand...
Hey for a baseline for this thing would you share your carb setup?!
 
You must log in or register to reply here.
Top Bottom