Super Jet concord or ijk and what pitch (a search did no good) rn sj

[snirunner24]

I have a 00 sj with stock pump, B-pipe, milled head, and msd enhancer. I'm looking for a all around prop. Low end pop, but also a nice top end. Most searches done just produced info for low end freestyle props.

Thanks

 

[raytherace]

Impros hookers 9/15, you wont be disapointed

 

[snirunner24]

Impros hookers 9/15, you wont be disapointed

You might be right but I get a discount with solas. That's why I asked about solas products!!!!

 

[icecoled007]

Buy any solas then.... sell it on ebay....

Then buy a Hooker 9/15

There is a reason it is #1.....

 

[snirunner24]

I think your very wrong I know a lot of people who run solas and love them. That's why I asked about them and I'm sure that with all the different pitches you can get, a solas would be just as good.

 

[kevbo]

I have a 00 sj with stock pump, B-pipe, milled head, and msd enhancer. I'm looking for a all around prop. Low end pop, but also a nice top end. Most searches done just produced info for low end freestyle props.

Thanks

Solas does not make an impeller that is too low pitched so their lowest is still too high for best thrust. The closest out of the box is the "S" 14-17. The 13-17 concord is a little more load. Bore your nozzle with either and you will gain thrust without losing any speed.

 

[Scraggly]

I ran a 14/18 Solas concord cut back 3mm on pretty much the same setup and stock pump. It worked awesome! And i would only go 12/17 or so with a mostly stock setup. I don't like the real low pitch. and this also fit my riding style. I like all the low punch u can get, but I still want to have top end when i want it. An with my setup I felt it was dialed right with a 14/18 Solas

Edit: I also talked to Dave at impros with the intention of getting his recommendation on my setup and him selling me a impeller and him being such a nice guy told me what I had was exactly what I thought I was looking for lol
I kept the concord and after hearing it from Dave I was sure I wouldn't br happy with anything else.

 

[snirunner24]

How do you get it cut back?

 

[yamanube]

I too ran a 14/18 concord on multiple limited setups and it worked well.

 

[vshockey10]

I have a 10/16 recommended by Dave @ Impros in my 00 sj with a Bpipe (blaster mod chamber). In talking with Dave he said because I am running buoys mainly with this ski the 10/16 hooker is the way to go. But in a solas he has a custom pitch 13/15 cut back that is close.