Chamber Decision

[Rushford_Ripper]

What would you recommend as the best chamber for my setup.

62T, ADA head, dual 38s, B-pipe, waterbox, 9/15 hooker in a B.O.B.

 

[Big Kahuna]

What are you wanting to do? But based on your specs, if you have a 62T cylinder, I would go Limited.

 

[Rushford_Ripper]

It has a 62T cylinder yes, building for low end. I am still building the ski and currently have a blaster mod chamber.

 

[DAG]

All 3 can work very well with your setup. Depends how you tune them in.

 

[Rushford_Ripper]

I ran a limited on another ski I had without a head, had very nice power, then added a head to that same motor and swapped the pipe to a fx-1 chamber which really hit hard. I currently run a blaster mod in my blaster with a 735/head and it is by far the most powerful but the engine is a bit different so that is what I have to go off of.

 

[Quinc]

Stick with the blaster mod. But before you put it on hook up your head pipe to a hose and adjust the water screws so you can visually inspect them and make sure the correct ones are spraying water etc.

 

[Rushford_Ripper]

That's actually a great idea, never thought of that!

 

[River Rat]

I've had all 3 and I couldn't tell the differences. They all ripped. As soon as I got an enhancer I got more juice. Then 38s to 46s and I was amazed. I'd go with the blaster chamber mod tho

 

[Rushford_Ripper]

So really no huge power difference, just mainly design?

 

[Vumad]

I voted limited because I have a B1 and there are no B1 mod pipes available. I realize you may already have a B1 pipe, and that would mean if you got a limited then the B1 mod would be available!

 

[Rushford_Ripper]

I voted limited because I have a B1 and there are no B1 mod pipes available. I realize you may already have a B1 pipe, and that would mean if you got a limited then the B1 mod would be available!

I was waiting for someone to say something like this haha

 

[MTRHEAD]

Don't waste your time with a blaster mod for your setup.

Limited
Mod
Blaster mod

In that order.

 

[Rushford_Ripper]

Guess I might be looking for a limited.....this is good, keep the opinions coming!

 

[Yami-Rider]

Idk if a limited will fit in a bob. Mod fits sooo much easier in a/m short skis.

 

[Rushford_Ripper]

I fit one in a squarenose, it should fit I would think.

 

[pigpen]

I was able to run a limited in my ROKr which I was told would never fit. Mine fits tight but works great. I would imagine you can run one in a bob with a small waterbox (xmetal gen 1, jetmaniac box, etc..)


Sent from my iPhone using Tapatalk

 

[Rushford_Ripper]

Yeah I ended up buying a jetmaniac waterbox. Guess its looking like a limited chamber, anyone have one they'd part with?

 

[Yami-Rider]

I fit one in a squarenose, it should fit I would think.

What does a squarenose have anything to do with a bob...?

You can make any "fit", it'll just be more of a pina every time you pull it in and out.

 

[Rushford_Ripper]

People asked me before how I fit a limited chamber in there that's all I was trying to saying.

 

[Vumad]

I voted limited because I have a B1 and there are no B1 mod pipes available. I realize you may already have a B1 pipe, and that would mean if you got a limited then the B1 mod would be available!

And I own this B-mod, suckaaaas.

Yeah I ended up buying a jetmaniac waterbox. Guess its looking like a limited chamber, anyone have one they'd part with?

Well, I hadn't planned on selling it... Kind of need it for when I put my X2 back together but it's been apart over a year...