building a stock class sxr best mods?

[tipafew]

Im really suprised you guys cant feel the difference in an inition on an sxr
Please show me what curve you are running as i think that maybe you are not using an aggressive enough curve

Wax, I had a bunch of diff. curves I ran in my Advent. I'm not saying I couldn't tell the difference at all, but it was VERY minimal. With my best curve I saw no improvement in top end over an advance plate. Just saw slightly more mid.

 

[waxhead]

what sort of bast timing were you using

 

[eel]

was going to see if anyone could give me some advice on drying my pipe out on my 05 sxr I put an exhaust sleeve on it airfilters,timing advance ,prop ,intke grate ,rideplate,woundering what routing works the best how many bypasses /control valve ?racing stock class

There is a 90deg. brass fitting on the top of the chamber. Pull it off and you will see a hole under it. Put a M5X0.8 helicoil in the hole (don't have to drill it) then you can use mikuni high speed jets to tune till your hearts content.

 

[sj995]

pipe

thanks i'll try it

 

[mybad]

Did you mean cheaterstock???? 90% of the stock boats on the line are running something that would DQ them in a protest. If your only running a few races for fun and dont need to qualify for the world finals I wouldnt worry too much about ther rule book. Ive never seen anyone get teched outside the world finals.

 

[alwaystandingup]

how far do you want to go?

 

[alwaystandingup]

You can crazy doing all the stocker stuff, from the grey to straight forward