Super Jet Bought a RN Have Motor Questions

[Sospikey]

For parts call jetmaniac on here #1 in service and knowledge. Im not exactly sure where in flordia he lives

Orlando

 

[gtoking1972]

i thought the twist heads only used a gasket. maybe someone milled the head for an o'ring, i know the twist head gasket are like no where to be found thats why i got rid of the one i had, it is a good head. as i said some one milled groves for the o'rings call x-scream at 727-442-7700 have rick ask chuck if they did do o'rings on those heads? most likley the same as ada orings if they did... rebuild kit, gaskets or and service needed, tuned set up ect... x-scream does all my work and i own a auto repair shop. i like to hit the start button and ride..

Thanks chasingdaylight I really appreciate the info that is somewhat of what I am thinking because it does have some sort of plastic head gasket like everyone is complaining about finding but it also has o-rings so maybe it does have a milled head. Anyone know the OEM Spec head thickness on this head I can measure it when I get home to check for sure? Thanks Again guys!

 

[SUPERTUNE]

Send me a PM to remind me to look and see if I have any o-ring for the domes.
And yes the Twist heads use both a plastic headgasket and dome o-rings.
This is stock from Twist Engineering.
If anything, surely you can order them from MSC supply, go by o-ring thickness 1st, then by i.d. and o.d.
Viton is the material you need.