Super Jet blowsion head Stock pipe??

quick question can i install a blowsion head with the stock pipe or do i need some adaptor kit like other heads require? secondly is this even worth it to install a head with out the B pipe?
(oh its a stock 2000 superjet)
 
ok lets put it this way i have $650 to spend i was gonna go with a blowsion cut back impeller and a pump cone and then the head but if you can think of a better mod for $200 then please im open to ideas i already have a trim and steering mods.
 

Matt_E

steals hub caps from cars
Site Supporter
Location
at peace
Take the 650, buy a used b-pipe and a stock 2008-2011 impeller.

Keeping the stock exhaust will kill any performance you'd get from the mods you listed.
 

Matt_E

steals hub caps from cars
Site Supporter
Location
at peace
Those mods require some more power to really come to life.
You will not realize the full gains of an aftermarket impeller without the added power of a pipe.
About the pump cone - if it's the stubby cone for $50 or so, you won't see much gains at all.
If it's a TBM cone, or R&D, then you are probably just loading your engine down without more power.

Do what you want, but those mods make very little sense on a stock pipe. The stock exhaust is horrible.
You would be better off with an aftermarket pipe and no other mods vs stock pipe and your original list.
 
Last edited:

Big Kahuna

Administrator
Location
Tuscaloosa, AL
Find a good used B Pipe $500.00
Find a good used Prop $100-150.00 (may find for less)
Modify your stock CDI to disable the rev limiter.

Best bang for the bucks.
 
Top Bottom