Super Jet Blowsion dual breather bracket with stock pole

[GaSs_ZA]

Hey guys ,

I was told by blowsion that it is possible to use this dual breather bracket with the stock pole , I'm struggling to get the breather tubes in as the pole won't close due to the pipes , what can I do? Do I need to change the pipes ? Am I missing something ...

http://www.blowsion.com/products/1011-blowsion-pole-bracket-rrp-pole-for-96sj-rickter-and-fx1.aspx

 

[Crab]

You might need to carve out some of the foam in the pole. I use a dual XM bracket with a stock pole and one hole plugged up.

 

[frankv510]

I have been trying to get info on this also did you get it all figured out?

 

[eyeless]

i removed some foam from the pole but it was still a huge pain to get the hoses through and the bolt in place..
i run my pole tight and it will not go over front because the hoses are limiting it's movement, easiest would be to cut the pole bottom piece a little so it would let the hoses install correctly