Blaster help!

[W8kski]

I just recently bought a 95 Blaster stock, and it cranked and ran fine. I just had it painted by a local paint shop, got it back, cranked it again after putting everything back on and it ran fine. The next time I cranked it it bogs when revved all the way. What could this be from? I'm having trouble diagnosing this. Please help! It's a 61X motor with a single 44 Mikuni. It is also premix since the oil injection has been taken out. Trying to get it going for the weekend!! I haven't added gas or done anything. The only thing I have messed with is the T handle screw on the side of the carb that controls the idle speed. Did this cause this?

Thanks

 

[WaveDemon]

are you sure you turned the idle speed and not the low speed adjuster?

 

[W8kski]

I turned the one with the T-handle on it.

 

[W8kski]

This is the one I turned. The one with the spring.

 

[WaveDemon]

yep, that the idle. when you mess with it you can upset the air/fuel ratio near idle speed because of the change in air speed. put it back and see if it's better.

 

[W8kski]

What's the best way to adjust it? It idles fine the way it is. Should I hold the throttle wide open and adjust it, or does that not work? I can't do it right now the neighbors will be pissed.