Blaster build

[Roachey]

93 b1 61x/61x blowsion head. Stock pipe. Front carteb rocker. Just finished the rocker figure I would start a build thread for me ski as I will be doing a lot of stuff to it over winter. Can't believe how much more fun it is to ride Rockered I have a cut stock d plate in the back and this thing turns so hard. Would definitely recomend to anyone who freerides a b1 to go with the rocker. Took about 2 weeks to do it. Working on setting up/building my own rear waterbox I got one out of a gp760 and cut it in half can't believe how restrictive these things are drilled some more holes through the mid plate. And shortened it and put the exit on the rear should flow a lot better. I will post more pictures of it once I get it all welded up.

 

[Roachey]

So got bored and decided to flat deck it and shorten the rear 4 inches. It was already fun with the rocker can't wait to ride it with an exposed pump. Heres some pictures. I know before I started this project I was lost as too how much/what kind of glass to use. I ended of backing the hole for the deck underneath with cardboard and laying in 4 layers of 12ox biaxial e glass topped with 3 layers of 8oz cloth. Not the prettiest but sure does seem very strong. Just to give people ideas of what they can use hopefully inspires more people to start hacking these things up and turning them into surf machines!

 

[Joe McLaughlin]

I'll give you this, your not timid with going all the way! I have been thinking of something close. I would love to ditch the stock seat and all that fiberglass but I feel like it still needs a seat of some kind. Let me know how this bad boy rides, what you like and do not like. Looking good!
Joe........

 

[D95turbo]

Looking good!!

 

[Roachey]

2 more inches cut off below the pump cavity at an angle to give it a bit of rocker