Blaster Accusteer install question

[michael950]

Are you supposed to use the stock bolts (6 of them - 1=5)?

When I use the nuts, they do not thread all the way. Am I supposed to buy some 6x1 40mm stainless machine screws?

 

[sflsurfrider]

i would use nuts on the bottom side for good measure

 

[michael950]

When I use the nuts, they do not thread all the way.

Only 1/3 of the nut is threaded on the bolt.

 

[sflsurfrider]

use longer bolts

 

[onesojourner]

just make sure they are stainless.